D88d Straight Motors
Product Model
D88d-24200-2200
Application Range
DC Motor with voltage of 24V input.
Performance :
(The spec below could be revised according to customers' requirements)
No. | Item | Requirement | Remark |
1 | Rated Voltage (V) | 24V | Regular Examination |
2 | Rated Current (A) | 4.7.0±0.5A | Regular Examination, on load testing. |
3 | Rated Power (W) | 30±5W | Regular Examination, on power testing |
4 | Rated Speed (rpm) | 2680±150rpm | Regular Examination, on load testing. |
5 | Rated Torque (N.M) | ≥0.28N.M | Regular Examination, on power testing. |
6 | Unload current (A) | ≤1.2A | Regular Examination, on current testing. |
7 | Unload speed (rpm) | 3200±200rpm | Regular Examination, on speed testing. |
8 | Steering | Wise |
|
9 | Insulation | Level B |
|
10 | Protection | IP20 |
|
11 | Temperature for running (℃) | -10℃-65℃ |
|
12 | Temperature for storing (℃) | -10℃-50℃ |
|
13 | Humidity for storing (%) | ≤85 |
|
Outer and installation structure.
Test condition.
1、 Temperature of circumstances 25±5℃..
Noisy | ≤55dB |
| Regular Examination |
Shaking | ≤1.8mm/S |
|
|
Temperature up | ≤50℃ |
|
|
2、 Noisy: The noisy should be lower than 55dB when the motor is unloading and distance 300m.
3、 Mechanical shaking: The testing should be according to GB10068.1 rules. The shaking speed should
be lower than 1.8mm/s while the motor is unloading.
4、 Insulation resistance: Should be larger than 20MΩ in regular temperature and humidity.
5、 Insulation withstand voltage intensity: After insulation process, the armature and housing should
not be flashover and breakdown while the voltage up to DC300V/60S/5Ma or DC300V/1S/5mA.
6、 Start voltage: The increasing of voltage should be 3V/S under the condition of regular temperature
And rated frequency, The motor should be in normal function while it’s unloading. Please self check
and confirm the situation after the motor was installed.
Selection of parameters table